IncroMold™ K
IncroMold™ K internal mold release additive is used to improve cycle time, productivity and surface finish in a variety of polymers, suitable for use at temperatures of around 280 - 300 °C.
IncroMold™ K additive can be dispersed evenly through the polymer in the melt phase or dosed via a masterbatch. It migrates to the surface of the polymer where it forms a thin lubricating layer. This layer reduces coefficient of friction between surfaces and reduces any unwanted adhesion.
Guidelines for Use:
IncroMold™ K internal additive can be incorporated into resin as supplied or via masterbatch / pre-blend. Experience has shown that simple manual mixing prior to processing will normally give an acceptable dispersion, though mechanical means are preferred.
Typical addition levels of 0.5% are recommended.
Key Specs
Property | Units | Value |
---|---|---|
Origin | N/A | Vegetable |
Color | Gardner at 25°C | 5 |
Bio-based content | % | 100 |
Regional Availability
Global
Form at 25°C
Bead
Brochures
Industry Market Areas
- Automotive – automotive plastics
- Injection molding
Function & Effects
- Mold release
- Scratch resistance
Features & Benefits
- Consistent mold release
- Reduced cycle times
- Continuous running
- Scratch resistance
- Improved surface finish
- Reduced machine wear and cleaning
Regulatory
- Globally available. Please contact us for specific inventory clearances.
Food contact approval:
- Some food contact approvals available. Contact us for more details.